SY1080 Electric Drop Bolt Door Lock DC 12V Magnetic Induction Auto Deadbolt for Security Access Control SystemUSD 7.14/piece
Free shipping 12V Electronic Door Lock Electric Drawer Cabinet Locks Rfid Access Control for Cabinet DrawerUSD 8.37/piece
Free shipping Sy-2081ej Nc/NO cathode lock access control lock access control electric lock mouth intelligent locK DC-12VUSD 18.80/piece
Free shipping ZYE1-1038 12/24V 5N 10mm frame traction Electro Holding Magnet/Traction motor Push-pull type/ Automatic resetUSD 12.13/piece
DC-12V Cabinet electric lock /Micro safe Cabinet Lock/storage cabinets electronic lock/file cabinet locksUSD 10.34/piece
DIY battery Smart Home Security Electronic Lock Stealth Wireless Remote Control Home Door Locks bolt latch 4 remote controlsUSD 121.26/piece
DIY Syrd-j password lock access Entrance guard combination lock Electronic combination lock/ Wooden door lockUSD 93.06/piece
DC-12V Built-in spring Automatically open door /Smart cabinet lock/intelligent electronic control lockUSD 6.49/piece
1 lock(without battery)
1 RFID wristwatch
1. Initialization Settings
Lock battery into the battery box body, use the tip tool hold set switch, hear the sound “di”, and red light, sound and music, initial success.After the initialization, all match the CARDS were cancelled.
2. Master card (1)
Brush configuration principal card: after initialization, the first card, green light, the music sound at the same time, the card configuration is given priority to.
Change the main card: according to the initialization after the switch, a credit card, the card for the new master card.
Note: a lock can only be configured a master card.Master card is mainly used for configuration or delete a card, cannot be used to unlock, shut.
3. Admin Card (5)
Brush configuration management card, master card, the music, red and green light flash 6 seconds (during), credit card, lock the music, red and green light flashing, the configuration of card to card.During light flashing, can continue to configure, until with full (5).
Brush to remove card: master card, the music, red and green light flash, then brush the card, the music, red and green light flashing, principal card is brushed again for the third time, lock out another kind of music, light, all card will be deleted.All user card also be deleted.
Card lock: brush card, the music, at the same time, red and green light flash 6 seconds, “di”, and green light, the spinner knob to “OPEN” position, the lock.After the lock, user card be cancelled.
Note: the card is used to configure or remove user card;Can also be used to lock (or shut).After card lock,
User card be cancelled.
4. User card (1)
Configure user card: brush card, the music, red, green light flash, then brush card, the music, the green flash, swipe, lock the music, user card configuration.
Delete the user card: brush card, the music, at the same time, red, green light flash 6 seconds, “di”, green light, open the lock.After the lock, user card be cancelled.
User card shut: brush user card, music, red light, the spinner knob to “CLOSE” position, shut.
User card lock: brush user card, music, green light, the spinner knob to “OPEN” position, the lock.
Shut flash: after shut, lock once every six seconds flash a red light, to show the lock in use.
Illegal card alarm: brush not preparation, 6 times, continuous alarm lock from 20 seconds.During alarm, open the door CARDS can terminate the police.
Under-voltage alarm: when the battery voltage to DC3.3 V + / – 0.2 or so, a credit card, green light, the spinner knob lock, at the same time issued a warning to the music.
If emergency lock: lock to unlock its battery runs out, the power converter with 9 v and lock the two contact contact, card lock.
Self test: when the battery is connected, click the Settings button, red, green light, “di” a cry at the same time, loosen the set key, in time to process into the circuit board testing.After the traffic light into the cycle of weak current and read card detection.If the detected voltage, report to the police.Press set button again to end self test.